Using the right carpet cleaning solution can make all the difference when it comes to keeping your carpets clean, smelling fresh and looking their best. From choosing the right detergent for your machine to understanding how much to use, here’s everything you need to know about carpet washing solutions.
what’s a carpet cleaning solution?
A carpet cleaning solution is a specially-formulated detergent designed to work with a carpet washer to remove dirt, stains and odours from carpets and rugs. Unlike everyday household cleaning products, carpet cleaning solutions are developed to work with your machine’s washing and extraction process, helping to lift embedded dirt from carpet fibres and leave them looking and smelling fresher.
how do carpet cleaning solutions work?
Carpet cleaning solutions work by helping to loosen, break down and lift dirt, grease and stains trapped within carpet fibres, making them easier for your carpet washer to remove.
When used with a compatible carpet washer, the cleaning process typically involves three stages:
- Washing: The machine distributes a mixture of water and carpet cleaning detergent onto the carpet, helping to loosen dirt and stains.
- Agitation: The carpet washer’s brushes work the solution into the carpet fibres, helping to dislodge embedded dirt.
- Extraction: Powerful suction removes dirty water and loosened debris, leaving carpets cleaner and ready to dry.
why do carpet cleaners need a special detergent?
Carpet washers need special cleaning solutions because they’re designed to operate with specific formulations that clean effectively without producing excessive foam or leaving unwanted residue behind.
Unlike general household cleaners, compatible carpet cleaning detergents are formulated to work with the machine’s water delivery, brushing and suction systems.
Using a proper carpet cleaning solution offers several benefits:
- Effective stain removal: Helps break down everyday dirt, spills and stubborn marks.
- Controlled foaming: Reduces excessive suds that could interfere with the machine’s performance.
- Minimal residue after cleaning: Helps avoid leaving sticky deposits that can attract more dirt.
- Tackling odours: Certain formulations are designed to tackle unpleasant smells, including those caused by pets.

what can’t i use washing machine detergent, washing-up liquid or hand soap in my carpet cleaner?
You shouldn’t use washing machine detergent, washing-up liquid or hand soap in your carpet washer because these products aren’t formulated for carpet cleaning machines and may produce large amounts of foam, leave residue or interfere with the machine’s operation.
Although they might seem like convenient alternatives, household detergents can cause several problems – here’s why.
Laundry detergents often contain fragrances, fabric conditioners or other ingredients that may leave residue in carpet fibres. Even low-foaming laundry detergents aren’t necessarily suitable for carpet washers.
Washing-up liquid is designed to create suds that help remove grease from dishes. In a carpet washer, excessive foam can interfere with suction and make it difficult to extract the detergent completely. Residue left behind may also attract dirt.
Hand soaps can contain moisturisers, oils and fragrances that aren’t suitable for carpets or carpet cleaning equipment. These ingredients may leave unwanted deposits on carpet fibres, while excessive lather can make rinsing and extraction more difficult.
how to add carpet cleaning detergent to your machine
Adding carpet cleaning detergent to your carpet washer is straightforward, although the exact process depends on your machine’s model and whether it uses a separate solution compartment.
- Make sure you’re using a compatible carpet cleaning solution and check the recommended detergent quantity.
- Remove the water tank. Switch off and unplug your carpet washer before removing the tank or filling it, and make sure the tank is clean.
- Always add water first. Fill the tank with clean water to the indicated level, using the temperature recommended in your machine’s instructions. After adding water, add the correct amount of solution, following the product label and your machine’s guidance.
- Refit the tank securely. Make sure the cap is properly closed and the tank is correctly positioned before switching the machine on.
- Start cleaning. Follow your carpet washer’s operating instructions, working in steady, overlapping passes to distribute and extract the cleaning solution.
Some Vax carpet washers have separate compartments for water and detergent, while others require the solution to be mixed directly into the clean water tank. Always follow the instructions for your specific model rather than assuming the same method applies to every machine.

how much carpet cleaning solution should i use?
The amount of carpet cleaning solution you need depends on your carpet washer, the type of detergent you’re using and the size of the area you’re cleaning. Always follow the dilution instructions on the solution bottle and your machine’s user guide to get the right balance of water and detergent.
Don’t be tempted to overdo it; using more detergent doesn’t necessarily mean cleaner carpets. Too much solution can create excess foam, leave residue in carpet fibres and make it harder for your machine to extract dirty water effectively.
carpet cleaning detergent faqS
WHAT’S A SPOTWASH: DETERGENT OR SOLUTION?
A SpotWash detergent is a cleaning solution specially formulated for use with a portable spot washer, helping remove spills, stains and dirt from smaller areas of carpets, rugs, upholstery and car interiors.
Unlike a full-sized carpet washer, which is designed to clean larger carpeted areas, a spot cleaner lets you target individual stains and spills without washing the entire carpet.
The main difference is that carpet cleaning detergents are formulated for full-sized carpet washers, while spot washer detergents are designed for portable machines that target smaller areas and individual stains.
Both help loosen and remove dirt, but their formulations are developed for different cleaning equipment and applications.
can i clean my carpet with just water or without detergent?
Yes, you can use plain water in many carpet washers, provided your machine’s instructions allow it. However, water alone is generally less effective at removing grease from carpets, stubborn stains and embedded dirt.
Water-only cleaning can be useful for rinsing away residual detergent after washing, or refreshing lightly soiled carpets. For a more thorough clean, particularly in busy households or carpeted homes with pets, a compatible carpet cleaning detergent will usually deliver better results.
which vax carpet cleaning detergents are suitable for wool carpets?
Cleaning wool carpets requires extra care, so it’s important to choose a WoolSafe-approved cleaning solution. Vax offers several carpet cleaning detergents suitable for washing wool carpets, including:
- Vax Original
- Original Pet
- Ultra+
- Ultra+ Pet
- Platinum Professional
- Platinum Antibacterial
- Platinum Ultimate
Vax StainShot Oxy is also suitable for wool when used with a compatible MAXClean StainShot model.
why is my detergent foaming in the water tank when i use my carpet cleaner?
If your detergent’s excessively foaming up in the water tank, these two issues could be the cause:
- You’re adding detergent to the tank before adding water – the water splashing into the tank can create bubbles. It’s best to add the water to the tank first, then carefully pour the detergent in.
- Excessive foaming can also happen added too much detergent, used an unsuitable cleaning product or left residue from a previous clean. To prevent this, always use a dedicated, low-foaming carpet cleaning solution, and make sure you thoroughly rinse out the water tank after every use.